ASP84 Biodegradable plastic cornstarch based PLA raw material for films

Polylactic acid material ASP84 is a polymer material produced by the fermentation of lactic acid produced from renewable resources such as corn, and then polymerized by lactic acid. 

SPECIFICATIONS

ASP84 Polylactic acid pure material - Characteristics: Low melt flow rate, Low melting point and High transparency.

APPLICATION

ASP84 Polylactic acid pure material is suitable for Film blowing, Film laminating, and High transparent PLA products.

Typical Applications:

1. ASP84 PLA pellet is often blended with PBAT to meet the requirements of transparency, stiffness and toughness of the Film bag by adjusting the material ratio.

2. The Film laminating layer produced by ASP84 pellets is uniform and flat, with strong adhesion and gloss, which can be contacted with food, water and oil resistance, environmental protection and safety.

3. Because of high transparency of ASP84 pure material, it is suitable for making transparent packaging products through the blister process.

INTERNATIONAL REGULATIONS AND STANDARDS

iSuoChem Polylactic acid materials ASP84 PLA resins Meet EN13432, ASTM D6400, GB/T 20197-2006, GB 4806.6-2016, GB 4806.7-2016, EN16785, ASTM D6866, and Other compostable degradation standards.

Besides, our Polylactic acid products also have passed the SGS, FDA, VINCOTTE, German DIN, and US BPI compostable degradation certification.

ECOLOGICAL CYCLE DIAGRAM

ASP84 Polylactic acid material (PLA resin) is made of corn, cassava and other crops as raw materials.

PACKAGING

Packed in 25kg/850kg/900kg/1000kg bags, filled with nitrogen for protection and on pallets.