ASP82 PLA plastic granules is mainly suitable for Injection molding, 3D Printing, Toys.
Item No.:
ASP82Brand:
iSuoChem or OEMColor:
Crystalline whiteAppearance:
ParticlesMOQ:
25kgsFeatures:
Heat resistance, High clear
PLA plastic granules ASP82 is a polymer material produced by the fermentation of lactic acid produced from renewable resources such as corn, and then polymerized by lactic acid. It has quite good bio-degradability.
SPECIFICATIONS
|
Appearance |
Crystalline white particle |
|
Density (g/cm3) |
1.24 |
|
Moisture (%) |
≤0.05 |
|
Monomer content (%)
|
≤0.3 |
|
Melt Flow Index(g/10min) (190C/2.16kg) |
4 |
|
D-Content (%) |
2 |
|
Melting Point (°C) |
165 |
|
Glass Transition Temperature (°C) |
60 |
|
Tensile Strength (MPa) |
50 |
|
Elongation at Break (%) |
≤5 |
ASP82 PLA granules - Characteristics: Moderate melt flow rate, Moderate melting point and High transparency.
APPLICATION
By using the crystallization properties of ASP82 PLA pure material resins, ASP82's finished products can achieve temperature resistance. It is suitable for 3D printing consumables, Injection molding (Disposable tablewares), Toys, Sheets and Films (two-way stretch BOPLA film with High strength, Good toughness and Good transparency ).
COMPLY WITH RELEVANT INTERNATIONAL REGULATIONS AND STANDARDS
iSuoChem PLA materials ASP82 Polylactic acid granules Meet EN13432, ASTM D6400, GB/T 20197-2006, GB 4806.6-2016, GB 4806.7-2016, EN16785, ASTM D6866, and Other compostable degradation standards.
Besides, our Polylactic acid products also have passed the SGS, FDA, VINCOTTE, German DIN, and US BPI compostable degradation certification.
ECOLOGICAL CYCLE DIAGRAM
ASP82 PLA resin (Polylactic acid resin) is made of corn, cassava and other crops as raw materials.
PACKAGING
Packed in 25kg/850kg/900kg bags, filled with nitrogen for protection and on pallets.
English
français
русский
español
português
العربية
한국의
ไทย
Tiếng việt
Indonesia
